Wednesday, May 9, 2012

Black Pearl Project - Get out of my house, Boat!!



Does anybody remember the song by the Shuffle Demons, "Get out of my house, roach"? Well. that's how I've been feeling lately about this project. Work on the boat slowed to a snail's crawl as I waited for paint to dry and while I finished off the loose ends, like the end caps.  Today, I decided that it was time to give'er the boot!!

For many (most) people removing the boat from the building area is simply a matter of flinging open a garage door or opening a basement window. But when you build an 18' 6" boat in an attic, removal tends to be much more of a production!! After supper I prepared the boat for it's send off, i.e., took it off the table, moved the table out of the way (which involved moving bits of drum kit), shifted a whack of crap and even had to remove a stud from the knee wall!!


Table shifted, boat tossed to one side!!
With the aid of Cheryl and Paddy we managed to get it down the stairs - it JUST barely fit. If not, I would've had to cut a header off the stair well. I'm glad that it went well!! 


Out the front window. Anybody following my blog for the past year will recognize this scene!!

The "hand off" to the ground crew!!

Bridget showing the lay back capabilities of the low back deck. Having a spine with only 12 years on it is a benefit too!! 

And now for some mandatory "in the garden" shots!!






Finally, an accurate representation of the foam seat and bed liner colours!! Very hard to do in the attic with a flash.

On the rocks!

On the rocks again!!

Finally a good "topside" shot!!



Nice profile shot!!





I was planning on doing a blog entry on the end caps but I got lazy!! Here's the condensed version. I decided to use squash balls as the end caps - as per the designer's suggestion. Although Bjorn Thomasson suggests the use of squash balls, I've not seen them actually used - other than on his own boat. I think they look fine. I simply cut the ball open, filled it with thickened epoxy and pushed it on over the end of the boat. I should point out that I drove a screw into each end with a little of the head left out. This provided something extra for the epoxy fuse around. These two screws are the only pieces of metal in the entire boat!!


Bow end cap - yep, that's a squash ball!!

Toggles at work!

I like to wear my love of my home province on my sleeve. And when not on my sleeve, I wear it on the bow of my kayaks!! It all started several years ago when Cheryl gave me a Republic of Newfoundland sticker for my Baffin - which I proudly displayed on my bow. When I built my Point Bennett, she bought me another one and I put that on my bow. When I built my skin on frame,  Cheryl bought me another sticker but the stitch line on the fabric did not make placement easy, so the sticker languished on my computer desk. When I decided to build the Black Pearl, it was a given that the sticker would end up on the bow. And it did!!!


The Republic of Newfoundland tri-colour!!

The boat is here in the living room with me now as I do the last bit of lashing on a paddle park. Tomorrow evening, hopefully, it'll hit the ocean!!

Thanks for dropping by,

Sean



11 comments:

  1. very very nice! Good luck with the sea trials.

    ReplyDelete
  2. Hi Sean, looks like its all come together perfectly, kayak looks fantastic, almost a pity to put in in the water.. like the squash ball on the nose, great idea.i`m sure it will be a treat on the waves, good luck

    ReplyDelete
  3. Thanks folks.

    Steve: I'm actually really looking forward to getting it into the water - and not just to see how it paddles. I'm tired of pampering this boat. I want to get it scratched and full of salt crust so I won't be worrying so much about how it looks! Once that happens, I can begin to truly enjoy the boat.

    ReplyDelete
  4. Sean, you've done another fantastic job. You can be proud of yourself.

    I'll see you this evening for your sea trials.

    Tony :-)

    ReplyDelete
  5. Did you get her out tonight? Well done looks great!

    I also sport the tri colour. After a very drunk night in 99 with many needles and ink!... luckily it's not a trend!

    ReplyDelete
  6. Lee: Yep, I got her out for a run. Very nice yet very different. Too tired to do up a blog entry tonight. Maybe tomorrow!!

    ReplyDelete
  7. Parabéns Sean, o kayak está fantástico ! Diga-me por favor o peso total com que terminou.

    ReplyDelete
  8. Lovely craft Sean. "Sick" as the young ones would say!

    ReplyDelete
  9. Luis: I did not get a chance to weigh the boat but I'm guessing no more than 35 lbs.

    Thanks Brian. She's pretty slick in the water as well.

    ReplyDelete
  10. Hi Sean congratulations great job that I am from Spain so forgive my English, I am interested to build a BP but am beginner in both construction and operation of the kayak, I really like the greenland and the more beautiful models for me is the BP.
    It may seem a little risky for my first kayak for comfort, stability etc but I like it so much will finish building it.
    Let me say pudes your experience with the BP. thanks

    ReplyDelete
  11. Hi Sean congratulations great job that I am from Spain so forgive my English, I am interested to build a BP but am beginner in both construction and operation of the kayak, I really like the greenland and the more beautiful models for me is the BP.
    It may seem a little risky for my first kayak for comfort, stability etc but I like it so much will finish building it.
    Let me say pudes your experience with the BP. thanks

    ReplyDelete